Alliance Laundry Systems DRY2046N User Manual

802753

Check the filter screens in the fill hoses for debris 
or damage annually. Clean or replace them if 
necessary.

If the washer is filling with water slower than 
normal, check the filter screens. Clean or replace 
them if necessary.

Order filter screen Part No. F270300 from the 
nearest authorized parts distributor.

• To avoid possible property damage due to 

flooding, turn off the water supply to the 
washer whenever there will be an extended 
period of non-use.

• Leave the loading door open during extended 

periods of non-use to allow the wash drum to 
dry out and avoid a musty smell.

To prevent damage while moving the unit, the 
shipping materials MUST be reinstalled.

• Disconnect washer from electrical supply.

• While supporting the front access panel, 

remove two screws from the bottom edge of 
the panel.

• Gently lower the panel to remove it from the 

washer.

• Place the shock sleeves on all four shock 

absorbers. Refer to the illustration below.

• Insert hooked end of shipping brace into the 

open slot of the motor mount.

• Attach the brace with the five bolts and 

washers. Refer to the illustration below.

• Reinstall front access panel.

Refer to the INSTALLATION INSTRUCTIONS for 
proper procedures whenever the washer is moved.

The washer’s pump has a trap that may collect 
foreign objects. The trap may need to be cleaned if 
water is draining slower than usual. To clean:

• Disconnect washer from electrical supply.

• While supporting the front access panel, 

remove two screws from the bottom edge of 
the panel.

• Gently lower the panel to remove it from the 

washer. 

• With rag or vacuum ready, unscrew the cap 

on the left side of the pump and remove trap.

• Clean the debris from the trap.

• Reinstall the trap and access panel.

• Reconnect washer to electrical supply.

FLW2182N

FLW2182N