Konica Minolta DYNAX40M User Manual
37
ABOUT FULL-AUTO PROGRAM
Full-auto program completely automates the picture-
taking process. When the function dial is turned to or
from this position, the following are reset:
taking process. When the function dial is turned to or
from this position, the following are reset:
Exposure compensation (p. 42)
Off
Multiple exposure (p. 48)
Autoflash
Flash mode (p. 24)
Wide focus frame
Focus area (p. 46)
AF
Focus mode (p. 47)
Single-frame advance
Drive mode (p. 32)
P
Exposure mode (p. 38)
Off
Exposure bracketing (p. 48)
0.0
When using full-auto program, subject
programs, or program exposure, if the
required exposure is beyond the shutter
speed and aperture range, the shutter
speed and aperture displays blink on the
data panel. One of the viewfinder
exposure indicators blink to show if the
displayed exposure will cause
underexposure (<) or overexposure (>).
programs, or program exposure, if the
required exposure is beyond the shutter
speed and aperture range, the shutter
speed and aperture displays blink on the
data panel. One of the viewfinder
exposure indicators blink to show if the
displayed exposure will cause
underexposure (<) or overexposure (>).
In bright conditions, use a neutral density filter on the lens, load a
slower film, or, if using artificial lights, reduce the intensity of the
illumination. In dark conditions, use the built-in flash or load a faster
film.
slower film, or, if using artificial lights, reduce the intensity of the
illumination. In dark conditions, use the built-in flash or load a faster
film.
EXPOSURE WARNING - PROGRAM