Epson equity 320sx plus User Manual

6. Secure the end of the card to the back of the computer

with the retaining screw.

7. Follow the instructions in Chapter 5 to replace the cover.

Then see “Post-installation Setup” at the end of this chapter.

If you need to remove an option card, follow these steps:

1.

Remove the screw securing the card to the back of the
computer and pull it straight up and out of the slot.

2.

Cover the option slot opening with the original metal
cover and secure it with the retaining screw.

3. If you are removing an option card that controls a

mouse, you need to change the setting of jumper J4 on

the main system board. If you are removing a display

adapter card, you may need to change the settings of
jumpers Jl, J3, and J5. See page 6-2 for instructions.

4. Replace the cover. See Chapter 5 for instructions. Then

see “Post-installation Setup” at the end of this chapter.