Epson equity 320sx plus User Manual

If you have forgotten your current password and cannot use

your computer, follow these steps:

1. Turn off the computer and follow the instructions under

“Changing the Jumper Settings” in Chapter 6 to disable

the password function by setting jumper J2 to position A.

Be sure to ground yourself on the back inside panel of
the computer before touching any of the interior

components. Always replace the cover on the
computer before you turn it on again.

2. Turn on the computer. 

do not see the 

prompt.

When the 

prompt

appears, press 

4. Highlight 

and press 

the SETUP

menu.

Follow the instructions in Chapter 2 to either set a new

password or select 

Instal1ed (if you do not want to

set a new password). Be sure to save your SETUP
information when you exit the program.

5. Turn off the computer and follow the instructions under

“Changing the Jumper Settings” in Chapter 6 to enable

the password function by setting jumper J2 to position B.

6. If you do not have a hard disk, insert the Startup diskette

in drive A. Turn on the computer.

If you set a new password, you see the 

prompt. Enter the password to access your system. (See

“Using the Password” in Chapter 3.)

C-6