Pioneer VSX-AX4AVi-S User Manual

 

En

 

 

 – Use to turn on/off the power of the TV.

 

 – Use to adjust the volume on your TV.

 

 – Use to select the TV input signal.

 

 – Use to select channels.

 

The main buttons (

 

 

, 

 

 

, etc.) are used to control a 

component after you have selected it using the input 
source buttons. 

The controls above these buttons can be accessed after 
you have selected the corresponding input source button 
(for example 

 

, 

 

, 

 

 or 

 

). The following 

controls can be accessed when listening to the built-in 
tuner:

 

 – Switches between stereo and mono reception 

of FM broadcasts. If the signal is weak then switching 
to mono will improve the sound quality (page 30). 

 

 – Switches between named station presets and 

radio frequencies (page 31).

 

 – Use to search for programs that are 

broadcasting traffic or news information (page 32).

 

Press to check selected receiver settings (page 65).

 

Use this button to perform multi operations (page 69).

 

Press to access the controls outlined in white boxes (for 
example, 

 

), or to display the currently 

selected input source in the remote control LCD.

 

 

Press to turn on/off other components connected to the 
receiver (see page 67 for more on this).

 

This display shows information when transmitting 
control signals.

The following commands are shown when you’re setting 
the remote to control other components (see 

 

 on page 67):

 

 – Indicates the setup mode, from which you 

choose the options below.

 

 – See 

 

 on 

page 67.

 

See 

 

 on page 67.

 

 – See 

 

 on 

page 69.

 

 – See 

 

 on 

page 69.

 

 – See 

 

 on page 69.

 

 – See 

 

 on 

page 69.

 

 – See 

 

 on page 68.

 

 – See 

 

 on 

page 68.

 

 – See 

 

 on page 68.

 

Switches the remote to control the receiver (used to 
select the green commands above the number buttons 
(

 

, etc). Also use this button to set up 

surround sound (page 7, page 33). With 

 

, this 

selects the multi-room control (page 54), shown in the 
display as 

 

, 

 

.

 

Use to set the listening volume.

 

Mutes the sound or restores the sound if it has been 
muted (adjusting the volume also restores the sound).

 

 – Use to select an input signal (page 28).

 

 – Use to select the surround/virtual back 

channel mode (page 29).

 

 – Switches between direct and stereo 

playback. Direct playback bypasses the tone controls 
and any other signal processing for the most 
accurate reproduction of a source (page 28).

THX – Press to select a Home THX listening mode 
(page 27).

STANDARD – Press for Standard decoding and to 
switch between the various Pro Logic IIx and Neo:6 
options (page 26).

ADV.SURR – Use to switch between the various 
surround modes

 (page 27).

18 PHASE – Press to switch on/off phase correction 

(page 9).
MCACC – Press to switch between MCACC presets 
(page 28).

S.DIRECT – Press to select Auto Surround (page 26) 
or Stream Direct (page 28) listening.

VSX_AX4AVi.book.fm 25 ページ ２００５年６月２０日　月曜日　午後６時２７分