Pitney Bowes DM1000 User Manual

If you do not have the correct postage or date on a piece of mail, you can 

add more postage or change the date directly on a piece of mail. If you pre-

fer, you can print the corrections on at a tape instead and then apply it to 

the piece of mail.

1. If you are printing more postage on an envelope and if the envelope is 

sealed, press the seal key and select Sealer Off. If you are printing on 

a tape, go to step 3. 

2. Turn the piece of mail around 180 degrees so that the meter stamp is in 

the lower left corner as shown here. Then, place the envelope on the 

feed deck with the flap facing down.

3. To add more postage, press the Mode key and select Key In Postage. 

4. Enter the additional amount using the numeric keys and press Enter. 

Press the Start key. If you are printing a tape, press the Tape key. The 

additional postage prints on the envelope as shown below.

5. If you print a tape, apply the tape to the envelope below the existing 

meter stamp.

0030

00 30

0030

00 07

0030