Palsonic 5169p User Manual

After presetting the channels, you can skip unnecessary position numbers so that only the channels

you want to watch are selected.

1. Enter into the POS. MEMORY menu, select and highlight

POSITION, then select the unwanted program number with the

or        button. 

2. Press the     or     button to move the cursor to "SKIP". Press the 

After completion of channel preset, the position number will then 

be skipped when you select channels with the CH          button.

If you want to skip other unwanted channels, repeat step 1 above to 

change the channel number. 

or        button to select "SKIP ON" 

Select the position number you want to restore. Press the     or     button to move the cursor to

"SKIP". Press the       or        button to select "SKIP OFF". 

When sound and picture’s effect of a channel is poor (for example: one or two CATV channel’s
sound and picture are not standard), you can correct them by making use of Manual Fine Tuning). 

1. Enter into POS.MEMORY menu, select the channel you want to

manually 

fine tune. 

2. Press the     or     button to select and highlight MFT, then press 

the       or        button, the channel begins fine tuning until the 

optimum picture and sound is achieved. 

Note: if some channel’s colour is abnormal, it may be that the setting of
the colour system is wrong, please do adjustment according to The
setting of colour (on page 10) to set the colour system.

3. To exit the menu, press the MENU button repeatedly.

9