Perle Systems TS2 User Manual
67
Bootup Commands
Set Bootup
Description Specifies remote the TFTP host and pathname for files to be loaded after a IOLAN
reboot.
User Level Admin
Syntax
Syntax
Options
firmware file
configuration file
host
The host name or IPv4/IPv6 address of the server that contains the configuration or
firmware file. If you use a host name, it must exist in the IOLAN’s host table or be
resolved by DNS.
resolved by DNS.
Show ARP
Description Shows the current contents of the ARP cache.
User Level Admin
Syntax
User Level Admin
Syntax
Set cli
Description Allows normal users to execute certain admin commands.
User Level Admin
Syntax
User Level Admin
Syntax
Show Bootup
Description Shows the Firmware and Configuration files specified for IOLAN bootup.
User Level Admin
Syntax
User Level Admin
Syntax
set bootup firmware host <hostname> [file <path_filename>]
set bootup configuration host <hostname> [file <path_filename>]
The path and file name (do not use a drive letter), relative to the default path of your
TFTP server software, of the update software for the IOLAN that will be loaded when
the IOLAN is rebooted.
The path and file name (do not use a drive letter), relative to the default path of your
TFTP server software, of the configuration software for the IOLAN that will be loaded
TFTP server software, of the configuration software for the IOLAN that will be loaded
when the IOLAN is rebooted.
show arp
set cli [elevate-privileges on|off]
show bootup