Promise Technology EX8650 User Manual
SuperTrak EX Series User Manual
8
Installing the SuperTrak Card
The SuperTrak EX Controller card fits into any available 3.3-volt PCI-Express x8
slot. You can also plug the SuperTrak card into a PCI-Express x16 slot.
1.
slot. You can also plug the SuperTrak card into a PCI-Express x16 slot.
1.
Remove the cover of your system.
2.
Remove the inside slot cover of an available PCI-Express slot on the
motherboard.
motherboard.
3.
Install the SuperTrak card into the open PCI-Express slot.
4.
Fasten the SuperTrak card bracket to the system case.
5.
Attach one end of a SAS multi-lane cable to a SAS port on the SuperTrak
card.
See Figures 1 through 4.
card.
See Figures 1 through 4.
Note
The SuperTrak EX Controller cards are PCI Plug-n-Play (PnP)
devices. No changes are necessary in the motherboard CMOS or
BIOS Setup for resources or drive types in most applications.
devices. No changes are necessary in the motherboard CMOS or
BIOS Setup for resources or drive types in most applications.