Promise Technology EX8650A User Manual
Chapter 5: Management with WebPAM PRO
119
3.
Click the Controller
icon.
4.
Click the Battery tab in Management View.
In normal operation, the operational status of the battery shows Fully Charged
with a Reserve Capacity of 100%. If the battery is constantly recharging, its
reserve capacity drops significantly, or the battery remains discharged, replace
the battery. Also see “Viewing Enclosure Information” on page 121.
with a Reserve Capacity of 100%. If the battery is constantly recharging, its
reserve capacity drops significantly, or the battery remains discharged, replace
the battery. Also see “Viewing Enclosure Information” on page 121.
Silencing the Buzzer
To silence the buzzer for the current event:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Controllers
icon.
3.
Click the Controller
icon.
4.
Click the Buzzer tab in Management View.
5.
Click the Mute button.
The buzzer goes silent but will sound again for future events.
The buzzer goes silent but will sound again for future events.
Making Buzzer Settings
To make buzzer settings:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Controllers
icon.
3.
Click the Controller
icon.
4.
From the dropdown menu on the Buzzer tab, choose Settings.
5.
Check the Enable Buzzer box to enable the buzzer.
Uncheck the box to disable the buzzer.
Uncheck the box to disable the buzzer.
6.
Click the Submit button
The changes take effect immediately.
The changes take effect immediately.
Testing the Buzzer
You must enable the buzzer before you can test it. See “Making Buzzer
Settings,” above.
Settings,” above.
To test the buzzer:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Controllers
icon.
3.
Click the Controller
icon.