Promise Technology EX8650A User Manual
SuperTrak EX Series User Manual
128
Promise Enclosures
To locate a disk array in the enclosure, click the Locate DAx button. The disk
status LEDs will blink for one minute to identify the carriers holding the physical
drives used by the disk array.
status LEDs will blink for one minute to identify the carriers holding the physical
drives used by the disk array.
Creating a Disk Array
WebPAM PRO provides three methods of creating a disk array:
•
•
Automatic – Creates a default disk array and logical drive based on
unconfigured physical drives in the system. No user choices. See “Creating
a Disk Array – Automatic Configuration” on page 129.
unconfigured physical drives in the system. No user choices. See “Creating
a Disk Array – Automatic Configuration” on page 129.
•
Express – You choose the RAID characteristics and type of application.
Creates a disk array and logical drive(s) based on your input. See “Creating
a Disk Array – Express Configuration” on page 130.
Creates a disk array and logical drive(s) based on your input. See “Creating
a Disk Array – Express Configuration” on page 130.
•
Advanced – You specify all parameters for a new disk array. One logical
drive will be made automatically when you create the disk array. If you
specify less than the total available capacity, you can use the remaining
space to create additional logical drives now or at a later time. See “Creating
a Disk Array – Advanced Configuration” on page 132.
drive will be made automatically when you create the disk array. If you
specify less than the total available capacity, you can use the remaining
space to create additional logical drives now or at a later time. See “Creating
a Disk Array – Advanced Configuration” on page 132.