Polycom 7000 User Manual
NetEngine IAD User Guide
WAN Configuration
97
Configuring
Frame
Relay
Options
Relay
Options
To configure Frame Relay options, type
4
on the WAN Configuration
menu. The IAD displays the Frame Relay menu:
Figure 4–60. Frame Relay Options Menu
To perform these tasks, type the option and proceed to the corresponding
section. The tasks in this section are described beginning at the Frame
Relay Options menu.
section. The tasks in this section are described beginning at the Frame
Relay Options menu.
u
Configuring Fragmentation (following)
u
Configuring Maintenance Protocol (page
u
Configuring Congestion Parameters (page
)
u
Enabling or Disabling Coppermountain CMCP (page
Selecting Fragmentation Types
To select which fragmentation to use:
1. On the Frame Relay Options menu, type
1
to display the FR
Fragmentation Configuration menu.
Figure 4–61. Frame Relay Fragmentation Configuration Menu
2. Do one of the following:
a. Type
1
to select Configure FRF.12 Fragmentation—go to FRF.12
Configuration, following.
—or—
b. Type
—or—
b. Type
2
to select CopperMountain Fragmentation—go to
CopperMountain Fragmentation Configuration, on page
.
Setting FRF.12 Configuration
If you selected FRF.12 Fragmentation, the IAD displays the FRF.12
Configuration menu:
Configuration menu:
*****************************************
Frame Relay Options
*****************************************
1. Configure Fragmentation
2. Configure Maintenance Protocol
3. Configure Congestion Parameters
4. Enable/Disable Coppermountain CMCP (6200/6300)
2. Configure Maintenance Protocol
3. Configure Congestion Parameters
4. Enable/Disable Coppermountain CMCP (6200/6300)
*****************************************
FR Fragmentation Configuration
*****************************************
1. Configure FRF.12 Fragmentation
2. Configure CopperMountain Fragmentation
2. Configure CopperMountain Fragmentation