Polycom 7000 User Manual
NetEngine IAD User Guide
WAN Configuration
66
Setting Auto Cycle—Nokia DSLAM
Type
2
to set the SDSL speed to Auto Cycle for connecting to a Nokia
DSLAM.
The IAD saves the configuration and displays the SDSL Configuration
menu.
menu.
Setting Auto Sense—Coppermountain DSLAM
Type
3
to set the SDSL speed to Auto Sense for connecting to a
Coppermountain DSLAM. The IAD saves the configuration and displays
the SDSL Configuration menu.
the SDSL Configuration menu.
Enabling Autobaud Mode—Conexant DSLAM
1. Type
4
to enable or disable Conexant Autobaud mode.
2. The IAD Displays the current setting and a prompt:
Conexant AutoBaud Mode is currently DISABLED
Enter E to Enable, D to Disable:
Enter E to Enable, D to Disable:
Type
E
to enable or
D
to disable Autobaud mode and Sync Delay.
3. The IAD saves the configuration and displays the SDSL Configuration
menu.
When you enable Autobaud mode, you automatically enable Sync Delay.
Conversely, disabling Autobaud mode automatically disables Sync Delay.
Conversely, disabling Autobaud mode automatically disables Sync Delay.
Setting Sync Delay—Lucent DSLAM
1. Type
5
to enable or disable Sync Delay, which is paired with Conexant
Autobaud mode.
2. The IAD Displays the current setting and a prompt:
SDSL Sync Delay Disabled
Conexant AutoBaud Mode is currently DISABLED
Enter E to Enable, D to Disable:
Conexant AutoBaud Mode is currently DISABLED
Enter E to Enable, D to Disable:
Type
E
to enable or
D
to disable Sync Delay and Autobaud mode.
If you disable Sync Delay, you must set the SDSL data rate manually.
3. The IAD displays the following prompt:
Enter SDSL Data Rate (kbps):
Enter the rate (144 to 2320 kbps, evenly divisible by 8) and press
Enter.
Enter.
4. The IAD saves the configuration and displays the SDSL Configuration
menu.
Setting AccessLan CPE Mode—AccessLan DSLAM
Type
6
to set the IAD to CPE Mode for connecting to an AccessLan
DSLAM.
The IAD saves the configuration and displays the SDSL Configuration
menu.
menu.