Polycom MGC-50 User Manual
3-1
3
Initial System Configuration
The MGC-50/MGC-100 requires basic configuration before you can start
running conferences.
running conferences.
Initial IP Configuration
The system is shipped with a default IP address: 129.254.4.8. Ordinarily,
you need to change the MCU’s default IP address to the IP address
appropriate for the site's LAN. This section describes how to modify it using
a monitor and terminal to connect directly to the MCU.
you need to change the MCU’s default IP address to the IP address
appropriate for the site's LAN. This section describes how to modify it using
a monitor and terminal to connect directly to the MCU.
To modify the MCU default IP address to the site’s IP address:
1.
1.
Remove the Main Control Module cover.
Figure 3-1: MGC-100 Rear Panel
Initial IP
Configuration
Installing the
MGC Manager
Connecting
to an MCU
Configuring the
Network Services
Defining an MCU
Starting the MGC
Manager
NET
A
B
LAN
ALARMS
COM 1
COM
MUSIC
LINE IN
L
N
K
T
/ R
KB0
10/100 Mbits