Polycom spectralink jpi300 User Manual
PN: 1725-36122-001_M.doc
39
System Installation
Facility Analysis
Check the site to be sure pre-installation work has been completed
correctly. This includes:
correctly. This includes:
Location chosen for the shelves is adequate.
Rack (if rack mounted) is properly secured or backboard (if wall
mounted) is properly prepared.
mounted) is properly prepared.
Power is available.
Wiring to Base Station locations has been pulled and correctly
terminated.
terminated.
Phone lines for the handsets are installed and properly
terminated.
terminated.
Telephone system administrator is on-site to program the existing
telephone system.
telephone system.
If the work has not been completed, the Polycom Field Service
Engineer may leave the site and reschedule the installation when
the items have been completed or corrected, or may assist in
preparing the site.
Engineer may leave the site and reschedule the installation when
the items have been completed or corrected, or may assist in
preparing the site.
Check Components
At the installation site, unpack the system carefully, verify that there
is no shipping damage, and store in a safe place. As the field service
engineer unpacks, he or she must confirm that contents are correct by
comparing with the shipping documents.
is no shipping damage, and store in a safe place. As the field service
engineer unpacks, he or she must confirm that contents are correct by
comparing with the shipping documents.
Before beginning the system installation, begin charging a
handset. The Battery Packs for the handsets are not charged when
shipped. At least one fully charged handset is required to test the
system.
handset. The Battery Packs for the handsets are not charged when
shipped. At least one fully charged handset is required to test the
system.
5