Polycom spectralink jpi300 User Manual

Page of 68
 
PN: 1725-36122-001_M.doc 
57
Site Certification 
The Polycom field service engineer should not leave the site before 
contacting Polycom to perform remote install verification.  
The field service engineer should contact a Polycom engineer on the 
technical support line at  800-775-5330. The hours of operation are 6 
a.m. to 6 p.m. Mountain time, Monday through Friday. 
Before leaving the installation site, the field service engineer must 
complete the following items: 
†
 
From the Operator’s Console, copy the PCS.CFG file to diskette. 
From the Operator’s Console, press F1 (Supervisor State Display) 
then select 
Dump Config to PCS.CFG
. See SpectraLink 6300 MCU: 
Operator’s Console Chapter 5, section Dump Config to Disk for more 
information. 
†
 
Give the system administrator a map of the system showing the 
final Base Station locations. 
†
 
Perform end-user training. 
†
 
Perform administrative training and get a signature on the 
acceptance document. This document confirms that the 
installation has been correctly carried out, that the coverage area is 
correct, and that the client’s personnel have been trained. 
The installation is not complete until all certification steps have been 
performed.  SpectraLink 6000 Wireless Telephones should not be 
handed out until the site has been certified. 
9