Philips 150b3b-00c User Manual

Display position is incorrect

Push the Auto button.

●   

Adjust the image position using the Horizontal
Position &/or Vertical Position in OSD Main
Controls.

●   

Image vibrates on the screen

Check that the signal cable is properly
connected to the graphics board or PC.

●   

Vertical flicker appears

Push the Auto button.

●   

Eliminate the vertical bars using the Clock
Adjustment of VIDEO NOISE in OSD Main
Controls.

●   

Horizontal flicker appears

Push the Auto button.

●   

Eliminate the horizontal bars using the Phase
Adjustment of VIDEO NOISE in OSD Main
Controls.

●   

The screen is too bright or too dark

Adjust the contrast and brightness in OSD
Main Controls. (The backlight of the LCD
monitor has a fixed life span. When the screen
becomes dark or begins to flicker,

 

please

contact your dealer.

●   

An after-image appears

If an image remains in the screen for an
extended period of time, it may be imprinted in
the screen and leave an after-image. This
usually disappears after a few hours

●   

An after-image remains after the power
has been turned off.

This is characteristic of liquid crystal and is not
caused by a malfunction or deterioration of the
liquid crystal. The after-image will disappear
after a set amount of time

●   

Green, red, blue, dark, and white dots
remains

The remaining dots are normal characteristic
of the liquid crystal used in today’s
technology.

●   

 list to contact your local Philips

distributor.

 

Troubleshooting

file:///D|/Grace/03771/english/150b3bty/safety/saf_troub.htm (2 of 3) [1/30/2002 2:30:02 PM]