Philips 20ft3010-37b User Manual
LANGUAGE
SETUP x CONSUMER x
FEATURES MENU
_
An on-screen LANGUAGE option is available. You can set the TV's on-screen menu to appear in English, French, or
Spanish text. With the Main Menu on-screen. press the Menu button repeatedly, or use the Cursor Up and Down but-
tons, to select LANGUAGE with the TV’s highlight control bar. Press Cursor Right (+>) or Left (<- ) on the remote to
select English, French (FRANCAIS), or Spanish (ESPANOL). Text in the on-screen Menu will appear in the selected
language.
________________________________________________________________________________________________
Spanish text. With the Main Menu on-screen. press the Menu button repeatedly, or use the Cursor Up and Down but-
tons, to select LANGUAGE with the TV’s highlight control bar. Press Cursor Right (+>) or Left (<- ) on the remote to
select English, French (FRANCAIS), or Spanish (ESPANOL). Text in the on-screen Menu will appear in the selected
language.
________________________________________________________________________________________________
CHANNEL INSTALL
SETUP x CONSUMER x
FEATURES MENU_
When C
HANNEL
I
NSTALL
is highlighted, use Channel Up/Down, or enter the desired channel number using the Number buttons
you wish to edit. The following control items, contained within the Channel Installation menu, will affect the chosen channel.
CHANNEL - When C
CHANNEL - When C
HANNEL
is selected, use Channel Up/Down, or enter the desired channel number using the Number but-
tons.
*
NOT AVAILABLE ON HCIFACE 0.07 / HIFACE 1.0
Note: Inputs in italics appear in the menu, but are not implemented.
· AV1 refers to the CVBS input on the 20FT3010 jack panel.
· AV1YC, AV2, and AV2YC appear in the menu but are not implemented.
· A “channel” can be either an RF channel (1-125) or a video input (AV1, CVI). RF channels (1 - 125) can select ANTEN-
· AV1YC, AV2, and AV2YC appear in the menu but are not implemented.
· A “channel” can be either an RF channel (1-125) or a video input (AV1, CVI). RF channels (1 - 125) can select ANTEN-
NA (normal mode), or be re-directed to (i.e. used to select) a video input. In other words, Channel 3 could select AV1,
Channel 4 could select CVI, etc. This re-direction is sometimes referred to as channel mapping. However, video inputs
can select only a video input (AV1 / CVI). Video inputs cannot be mapped to ANTENNA.
Channel 4 could select CVI, etc. This re-direction is sometimes referred to as channel mapping. However, video inputs
can select only a video input (AV1 / CVI). Video inputs cannot be mapped to ANTENNA.
· Note: The screen will blank momentarily, and there will be a short delay, when you step through the C
HANNEL
and
I
NPUT
selections.
CHANNEL RING 1-4 C
HANNEL
R
ING
determines the channels or inputs that are accessible by means of the television’s key-
board (if it is not locked out) or from a guest-mode remote control. When C
HANNEL
R
ING
1, 2, 3, or 4 is highlighted, press
the Cursor Right (+>) or Left (<- ) buttons on the remote to choose SAVED or DELETED. When SAVED is selected, the
channel will remain in, or be added to, the respective channel ring. When DELETED is selected, the channel will be removed
from the respective channel ring and will not appear when TV channels are scanned (using the Channel +,- buttons). Each of
the four channel rings can be programmed individually, but only one channel ring can be in effect at any given time. The chan-
nel ring that is currently in effect is specified in the setup menu C
channel will remain in, or be added to, the respective channel ring. When DELETED is selected, the channel will be removed
from the respective channel ring and will not appear when TV channels are scanned (using the Channel +,- buttons). Each of
the four channel rings can be programmed individually, but only one channel ring can be in effect at any given time. The chan-
nel ring that is currently in effect is specified in the setup menu C
URRENT
R
ING
item (see C
URRENT
R
ING
).
INPUT - When I
NPUT
is highlighted, press the Cursor Right (+>) or Left (<- ) buttons on the remote to select ANTENNA,
FRONT, AUX, S-VIDEO input signal options. I
NPUT
directs the TV to select the specific indicated input whenever this chan-
nel is tuned. See CHANNEL, above.
LABEL - When L
ABEL
is highlighted, press the Cursor Right (+>) button on the remote to select the first character space area.
Then press the Cursor Up and Down buttons to scroll through the list of available letter characters/numbers/& symbols pro-
vided for your labeling use. Press the Cursor Right (+>) button to highlight the next character space and continue to repeat the
process until the complete label or channel title has been entered. The Channel Label will appear in the corner of the TV screen
beside the selected channel number.
vided for your labeling use. Press the Cursor Right (+>) button to highlight the next character space and continue to repeat the
process until the complete label or channel title has been entered. The Channel Label will appear in the corner of the TV screen
beside the selected channel number.
AUTO PROGRAM - When A
UTO
P
ROGRAM
is highlighted, press the Cursor Right (+>) or Left (<- ) buttons to begin an auto-
matic channel search for all available received signal programs. Any channels found will be SAVED in the TV’s program mem-
ory. N
ory. N
OTE
: The A
UTO
P
ROGRAM
feature is not available in HCIFACE 0.07 / HIFACE 1.0.
10
DFU 20FT3010/37 050404.0944 PRELIMINARY
IFACE / HIFACE ITV Setup Menu Item Descriptions
CHANNEL INSTALLATION
CHANNEL
AV1 /
AV1YC / AV2 / AV2YC / CVI / TV 1-125
CHANNEL RING 1
SAVED / DELETED
CHANNEL RING 2
SAVED / DELETED
CHANNEL RING 3
SAVED / DELETED
CHANNEL RING 4
SAVED / DELETED
INPUT
AV1 /
AV1YC / AV2 / AV2YC / CVI / TV 1-125
LABEL
(--------)
AUTO PROGRAM*
>
EXIT
>