Philips 42PFL5405H User Manual
EN 35
En
glish
Stand mount or wall mount
Specific TV settings are applied to suit the
mounting location of the TV.
Specific TV settings are applied to suit the
mounting location of the TV.
1. In the [Preferences] menu, select [TV
placement] > [On a TV stand] or [Wall
mounted], then press OK.
placement] > [On a TV stand] or [Wall
mounted], then press OK.
Update software
TV: Check version
NonPublish
1. Press .
2. Select [Setup] > [Software settings] >
[Current software info], then press OK.
The version of the current software is
displayed.
[Current software info], then press OK.
The version of the current software is
displayed.
TV: USB update
NonPublish
Before performing this procedure be sure to:
Set aside some time to complete the
entire update.
entire update.
Have available a USB flash drive with at
least 256 MB of storage space.
least 256 MB of storage space.
Have access to a computer with a USB
port and internet access.
port and internet access.
1. Press .
2. Select [Setup] > [Update software], then
press OK. The update assistant starts. Follow
the on-screen instructions to complete the
update.
press OK. The update assistant starts. Follow
the on-screen instructions to complete the
update.
Note: If you already have the upgrade file
downloaded onto a USB flash drive, connect
downloaded onto a USB flash drive, connect
it to the TV. Then, select [Setup] >
[Software settings] > [Local updates].
[Software settings] > [Local updates].
TV: Internet update
If your TV is connected to a router that is
connected to the Internet, you can update
the TV software directly from the Internet.
You need a high speed Internet connection.
Press > [Setup] > [Update now] and
press OK.
Select [Internet] and press OK. Follow the
instructions on screen.
When the update is done, the TV switches
off and back on again automatically. Wait for
the TV to switch back on; do not use the
connected to the Internet, you can update
the TV software directly from the Internet.
You need a high speed Internet connection.
Press > [Setup] > [Update now] and
press OK.
Select [Internet] and press OK. Follow the
instructions on screen.
When the update is done, the TV switches
off and back on again automatically. Wait for
the TV to switch back on; do not use the
Power switch on the TV.
If the TV is connected to the Internet, the
TV displays a message about the availability
of new software at start-up.
TV displays a message about the availability
of new software at start-up.
On-screen Help: Update
Before updating the on-screen Help, ensure
you have the following:
you have the following:
An empty USB flash drive. The USB
flash drive must be FAT or
DOS-formatted.
flash drive must be FAT or
DOS-formatted.
Do not use a USB hard drive.
A PC with Internet access.
An archive utility that supports the ZIP
file format (for example, WinZip for
Microsoft Windows or Stufflt for
Macintosh).
file format (for example, WinZip for
Microsoft Windows or Stufflt for
Macintosh).
Before updating Help, check the current
version installed on your TV. If the version of
Help on your TV is lower than the version
available at
(http://www.philips.com/support), download
and install the latest Help file.
1. Press .
version installed on your TV. If the version of
Help on your TV is lower than the version
available at
(http://www.philips.com/support), download
and install the latest Help file.
1. Press .
2. Select [Help], then press OK.
On-screen Help appears.
On-screen Help appears.
3. Navigate to the last page of the section
and note the version number.
Note: The version number is a 12-digit
number, where the last digit indicates the
version of Help installed on your TV. For
example, if the version on the TV is '3139
137 03583', '3' represents the version of
Help currently installed.
1. Insert the empty USB flash drive into a
USB connector on your PC.
2. On your PC, create a folder called
'upgrades' in the root directory of the USB
flash drive.
and note the version number.
Note: The version number is a 12-digit
number, where the last digit indicates the
version of Help installed on your TV. For
example, if the version on the TV is '3139
137 03583', '3' represents the version of
Help currently installed.
1. Insert the empty USB flash drive into a
USB connector on your PC.
2. On your PC, create a folder called
'upgrades' in the root directory of the USB
flash drive.