Philips 8270xl User Manual

C

 

  Turn the black 3-pronged locking bracket 

counterclockwise to unlock (1) and 

remove the retaining frame (2).

C

  Remove and clean one set of cutters and 

combs at a time.

C

  Separate the cutter from the comb and 

rinse clean under hot water.

Do not clean more than one cutter and comb 

at a time, since they are all matching sets. If you 

accidentally interchange the cutters and combs, it 

could take several weeks before optimal shaving 

performance is restored.

C

  Replace the set back into the Razor Head 

Assembly so that the ‘wings’ on the comb 

fit within the brackets located towards the 

center of the Assembly.

The set will only fit into the Razor Head Assembly 

if the ‘wings’ are between the brackets. Make sure 

that the two pointy edges of the head fit exactly 

into the recesses.

20

  Repeat the process for the other two sets 

of cutters and combs.

  Replace the frame.

C

  Press down (1) and turn the black  

3-pronged locking bracket clockwise (2) 

until it locks into place.

  Close the Razor Head Assembly.

For optimum performance, razor cutters and 

combs should be cleaned in a degreasing liquid 

(e.g. rubbing alcohol) and lubricated with one 

drop of mineral oil (in the center of the head).  

This helps prevent wear of the shaving heads.

 

  Turn razor OFF.

 

C

  Push down spring-release trimmer switch.

21