Philips 8040x User Manual

 

   You can store the razor in the charging 

stand.

 

   Put Protective Razor Head Cap on razor 

to protect heads.

Note: If lotion build-up has occurred, remove 

Razor Head Assembly and soak for a few minutes 

under hot water or a degreasing liquid (e.g. 

alcohol). Be sure to thoroughly rinse Razor Head 

Assembly under tap water before using razor.

Do not mix up the cutters and combs as the 

shaving performance may be adversely affected 

for several weeks before optimal shaving 

performance is restored.

 

  Turn razor OFF.

C

 

  Remove Razor Head Assembly from razor 

by pulling Razor Head Assembly straight 

up from razor.

C

 

  Using your thumb and forefinger turn the 

razor head clockwise and lift the comb off 

of Razor Head Assembly.

 

  Remove and clean one set of cutters and 

combs at a time.

24

Do not clean more than one cutter and comb 

at a time, since they are all matching sets.  If you 

accidentally interchange the cutters and combs, it 

could take several weeks before optimal shaving 

performance is restored.

 

  Separate the cutter from the comb and 

clean with a small brush or rinse clean 

under hot water.

  Replace the cutter back onto the Razor 

Head Assembly making sure the blades are 

pointing upwards.

C

 

  Place the razor head comb back onto the 

Razor Head Assembly.

Be sure to replace the comb back into the 

original razor head before cleaning the next set.

C

 

  Turn the razor head counterclockwise 

until it locks into place.

 

  Repeat the process for the other two sets 

of cutters and combs.

C

 

  Replace Razor Head Assembly back on 

razor and push down (you will hear a 

click).

The Razor Head Assembly will only fit correctly 

in one position on razor.  Make sure to align the 

2 shaving lotion dispensing holes on the Razor 

Head Assembly with the 2 shaving lotion tubes on 

the razor.

25

6

0

1

6

6