Philips 9750 User Manual

 

4

This chapter provides an introduction to the basic functions of the Philips 9750: 

•  Activating the device 

•  Memory card 

•  Start screen 

•  Menu 

•  Power Save mode 

The Philips 9750 is turned on and off by connecting/disconnecting the device to the mains power supply. 

The Philips 9750 operates with a memory card of the type MMC or SD. It supports MMC and SD cards with 
storage capacities of up to 1 GB. For example, a 32 MB memory card of the type MMC supports about 
312 minutes of recording time in SP format or 468 minutes of recording time in LPm format. 

If there is no memory card inserted into the device, this screen is displayed: 

 

After inserting the memory card, one of the following screens will be displayed: 

•  If the memory card is new and has not been formatted, a confirmation dialog for formatting the memory card is 

displayed: 

 

•  If the memory card has been in use before, a start screen with the information stored on the memory card is 

displayed: 

 

When you insert a new, unformatted memory card, the following screen is displayed: 

 

To confirm and start the formatting process, press the DELETE button for at least two seconds. If you want to 
cancel the formatting process, either remove the memory card or press the SKIP/BACK, STOP/PLAY or 
SKIP/FWD button. 

 Any memory card used with devices of the DPM product range should be formatted by one of these 

devices and not any other device. 

For more information on reformatting the memory card, refer to the corresponding Menu section of this manual. 

If only two minutes of recording time are left on the memory card, the recording time on the display will start to 
blink. This can either be the remaining recording time or the used-up recording time. Note that this additional time 
display is only available in combination with the Advanced display option.