Allied Telesis AT-CV5001AC AT-CV5001-AC Data Sheet
Product codes
AT-CV5001-AC
Datasheet |
Media Converters
AT-CV5001
18 slot Converteon chassis
Overview
The AT-CV5001 is one of a family of metal
chassis designed to house 1, 2 or 18
Converteon media blades.The AT-CV5001 is
the 18 slot chassis, AT-CV1203 is the two slot
chassis and AT-CV1000 is the one slot chassis.
chassis designed to house 1, 2 or 18
Converteon media blades.The AT-CV5001 is
the 18 slot chassis, AT-CV1203 is the two slot
chassis and AT-CV1000 is the one slot chassis.
Power Options and Redundancy
All the Converteon power supplies are hot
swappable and modular, installing two into a
chassis provides redundancy should a single
power supply fail. In an unmanaged chassis, the
status of each power is displayed via an LED
indicator on the front panel. A fully loaded
chassis can run continuously with only one
power module fitted into the chassis. Built-in
intelligent fan speed auto adjustment algorithm
based on the chassis temperature monitoring.
Software generates SNMP trap when chassis
temperature exceeds 65
swappable and modular, installing two into a
chassis provides redundancy should a single
power supply fail. In an unmanaged chassis, the
status of each power is displayed via an LED
indicator on the front panel. A fully loaded
chassis can run continuously with only one
power module fitted into the chassis. Built-in
intelligent fan speed auto adjustment algorithm
based on the chassis temperature monitoring.
Software generates SNMP trap when chassis
temperature exceeds 65
o
C. Software also
generates SNMP trap when FAN speed is
below 2647 RPM.
below 2647 RPM.
Network Management
The AT-CV5001 chassis can operate in an
unmanaged mode, by the installation of any
number of media blades. Blades will be
configured manually using DIP switches located
on each blade. Alternatively, an SNMP
management card can be installed into one of
the slots in the chassis, which will provide a
network administrator with the ability to
configure and monitor the status of the blades.
Management can be achieved locally over
RS232, or over the network by Telnet or SNMP.
unmanaged mode, by the installation of any
number of media blades. Blades will be
configured manually using DIP switches located
on each blade. Alternatively, an SNMP
management card can be installed into one of
the slots in the chassis, which will provide a
network administrator with the ability to
configure and monitor the status of the blades.
Management can be achieved locally over
RS232, or over the network by Telnet or SNMP.
If the blades support Ethernet in the First Mile
(IEEE 802.3ah), then the management module
can also configure and monitor the status of a
remote blade.
(IEEE 802.3ah), then the management module
can also configure and monitor the status of a
remote blade.
•
AT-CV5M02 Management card
Chassis Status
If the AT-CV5001 has a management card
installed, then a network administrator can also
check the status of the chassis, the status of the
fans and the power supply modules. By ensuring
the continued performance of all components in
the chassis, the overall reliability of the network
can be improved.
installed, then a network administrator can also
check the status of the chassis, the status of the
fans and the power supply modules. By ensuring
the continued performance of all components in
the chassis, the overall reliability of the network
can be improved.
Protocol Agnostic
The AT-CV5001 chassis has been designed to
be protocol, and speed agnostic.This allows
network administrators to deploy the chassis in
a wide range of network topologies in addition
to only Ethernet-based networks.Technologies
supported by the chassis include Ethernet, Fast
Ethernet, Gigabit, E1/T1 and serial
communications.
be protocol, and speed agnostic.This allows
network administrators to deploy the chassis in
a wide range of network topologies in addition
to only Ethernet-based networks.Technologies
supported by the chassis include Ethernet, Fast
Ethernet, Gigabit, E1/T1 and serial
communications.
Hassle Free Support
The Allied Telesis AT-CV5001 Converteon
chassis offers free technical support, ensuring
trouble-free installation.
chassis offers free technical support, ensuring
trouble-free installation.
Key Features
•
18 slot media and rate converter chassis
•
Single, or optional redundant power supplies
•
Hot swappable power supplies
•
AC and DC power options
•
Support for unmanaged or managed operation
•
Requires only 2RU of rack space
•
19” rack-mountable
AT-CV5001
Converteon
TM
Chassis
Allied Telesis
www.alliedtelesis.com