Philips aj3940 User Manual

You can set 4 different melodies for both alarm 1 or 2. The buzzer
melodies are set at a fixed volume and cannot be adjusted.
1. Press and hold down the selected ALM 1 or 2 button and set

your alarm time using the 

∞ or § controls.

2. Before releasing ALM 1 or 2 press the BUZZER button.

™ The display will show the buzzer icon  

under  ALM 1

or  ALM 2.

3. Hold down BUZZER and press  

∞ or § repeatedly until you

find the desired melody.
– The buzzer melody and alarm number will be shown and

the buzzer melody played as long as you press BUZZER

4. To review your selected buzzer melody over the speakers,

press BUZZER.

There are three ways to switch off the alarm. Unless you cancel
the alarm completely, the 24 HR RESET will be automatically
selected after 59 minutes, from the time your alarm goes first off.

24 hours reset
If you want the alarm mode to be stopped immediately but also
wish to retain the same alarm setting for the following day:
1. Press 24 HR RESET

™ You will hear a long beep tone to confirm that the 24 HR

RESET has been activated.

This will repeat your alarm call at 9 minutes intervals.
1. During the alarm call, press 

/REPEAT ALARM.

™ After 9 minutes the alarm will call again. 

2. You can press 

/REPEAT ALARM again as often as

desired.
™ The icon of your selected alarm 

, 

or 

and ‘ : ’ in

the display will flash throughout the time when

/REPEAT ALARM is active. 

13

COMPACT DISC

  CLOCK RAD

IO

XP AJ 3940/3941/17.1  29-03-2001 10:57  Pagina 13