Philips az1013 User Manual

If a fault occurs, first check the points listed below
before taking the set for repair. Do not open the
set as there is a risk of electric shock.

If you are unable to remedy a problem by following
these hints, consult your dealer or service center.

WARNING: Under no circumstances should you try
to repair the set yourself, as this will invalidate the
warranty.

Troubleshooting

English

Problem

Solution

No sound

– Adjust the VOLUME

Power cord not securely

– Connect AC power cord properly

connected

Batteries dead /incorrectly

– Insert (fresh) batteries correctly

inserted

Display does not function

– Electrostatic discharge

properly/ No reaction to

– Switch off and unplug the set. Reconnect after a few

operation of any of the

seconds.

controls

Er indication

– No CD inserted, insert a CD

CD badly scratched or dirty

– Replace/ clean CD, see Maintenance

Laser lens steamed up

– Wait until lens has cleared
– Wait until lens has acclimatized

CD-(R) is blank or the disc

– Use a finalized CD-(R)

is not finalized

CD playback does not work

– CD badly scratched/ dirty. Replace/ clean CD (see
maintenance)

The CD skips tracks

– CD damaged or dirty. Replace or clean CD.
– Program is active. Quit program mode

Poor cassette sound quality

– Dust and dirt on the heads, etc.
Clean deck parts, see maintenance.
– Use of incompatible cassette types (METAL or
CHROME). Only use NORMAL (IEC I) for recording

Recording does not work

– Cassette tab(s) may be broken. Apply a piece of
adhesive tape over the missing tab space.

XP AZ 1008/17 23-10-2000 14:31 Pagina 15