Philips az1119 User Manual

You can erase a program by:
– opening the CD door.
– setting the source selector to the TAPE or RADIO position.
– pressing STOP twice during playback/in the stop position.

Set the source selector to TAPE.

Press STOP•OPEN 

9 / to open the cassette holder.

Insert a recorded cassette.

Press PLAY 

1 and playback will start.

Adjust the sound using the VOLUME, and DBB controls.

For brief interruptions, press PAUSE 

;. Press PAUSE ; again to

resume playback.

By pressing 

5 or 6, fast winding of the tape is possible in

both directions.

To stop playback, press STOP•OPEN 

9 /.

– The keys are automatically released at the end of the tape.

Set the source selector to TAPE/POWER OFF position (with the
cassette keys released) to switch off the set.

General information on cassette recording
– Recording is permissible insofar as copyright or other rights of

third parties are not infringed.

– This deck is not suited for recording on CHROME (IEC 

II) or

METAL (IEC IV) type cassettes. For recording you should use
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.

– The recording level is set automatically. Altering the VOLUME

control or, DBB switch will not affect the recording in progress.

– No recording will take place during the first 7 seconds, when

the leader tape passes the recorder heads.

– To prevent the accidental erasure of a recording, keep the

cassette side to be safeguarded in front of you and break out
the left tab. Recording on this side is no longer possible.

9

AZ 1110/14 page 9

DYNAMIC

BOOST

BOOST

Y•PAUSE

PAUSE

SEARCH

PLAY

RECORD

STOP • OPEN

PAUSE

SEARCH

PLAY

RECORD

STOP • OPEN