Philips az2025 User Manual

7

General maintenance
• Do not expose the set, batteries, CDs or cassettes to humidity,

rain, sand or excessive heat caused by heating equipment or
direct sunlight.

• To clean the set, use a soft, slightly dampened chamois

leather. Do not use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may harm the
housing.

Safety information
• Place the set on a hard and flat surface so that the system

does not tilt. Make sure there is adequate ventilation to
prevent the system from overheating.

• The mechanical parts of the set contain self-lubricating

bearings and must not be oiled or lubricated.

1. Select TUNER source.
™

is displayed briefly and then the radio station

frequency is shown.

2. Press BAND once or more to select your waveband.
3. Press SEARCH

∞ or § (for AZ 2025 model only: on the

remote control, TUNING

∞ or §) and release when the

frequency in the display starts running. 

™ The tuner automatically tunes to a station of sufficient

reception. Display shows 

during automatic tuning.

™ If a FM station is received in stereo, 

is shown.

4. Repeat step 3 if necessary until you find the desired station.
• To tune to a weak station, press SEARCH

∞ or § briefly and

repeatedly until you have found optimal reception.

To improve radio reception
– For FM, pull out the telescopic aerial. Incline and turn the

aerial. Reduce its length if the signal is too strong (very close
to a transmitter).

– For MW (LW), the set is provided with a built-in aerial so the

telescopic aerial is not needed. Direct the aerial by turning the
whole set.

AZ 2025/00  

page

7