Philips AZ1575 Manual

16

5. Press RECORD

0 to start recording.

– Playing of the CD program starts automatically from the

beginning of the program. It is not necessary to start the CD
player separately.

To select and record a particular passage within a track:
• Press and hold down on SEARCH

∞ or § (on the remote

control 

5 or 6).

• When you recognize the passage you want, release SEARCH

∞ or §.

• To interrupt CD playback press PLAY•PAUSE 

2; (on the

remote control 

2;).

• Recording will begin from this exact point in the track when

you press RECORD

0.

6. For brief interruptions during recording, press PAUSE

;. To

resume recording, press PAUSE

; again.

7. To stop recording, press OPEN•STOP 

/ 9.

1. Tune to the desired radio station (see Tuning to radio stations).
2. Press OPEN•STOP 

/ 9 to open the cassette door.

3. Insert a suitable tape into the cassette deck and close the

cassette door.

4. Press RECORD

0 to start recording.

5. For brief interruptions, press PAUSE 

; To resume recording,

press PAUSE 

; again.

6. To stop recording, press OPEN•STOP 

/ 9.

To ensure quality recording and playback of the tape deck, clean
parts 

A, B and C shown in the diagram below, after approx.

50 hours of operation, or on average once a month. Use a cotton
bud  slightly moistened with alcohol or a special head cleaning
fluid to clean both decks.
1. Open the cassette compartment by pressing OPEN•STOP 

/ 9.

2. Press PLAY 

1 and clean the rubber pressure rollers C. 

3. Press PAUSE

; and clean the magnetic heads A and also the

capstan 

B.

4. After cleaning, press OPEN•STOP 

/ 9.

AZ 1575/17  

page

16

AZ157517  15-12-2000 19:00  Pagina 16