Philips CDR775 User Manual

Page of 29
English
20
Note: With 
AUTO TRACK ON, the recorder will stop and go
to REC STANDBY for 1 minute and then goes to Stop
mode automatically. Recordings from DAT, DCC or
recordings made analogously will stop after 20 seconds
silence. With 
AUTO TRACK OFF, the auto stop
mode is disabled.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs. 
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers always use 
REC EXT
DISC.
Preparing for autostart recording
The CD-SYNC feature enables you to make fast and easy
recordings of a CD. Track increments are automatically
detected from the source material. Track increments cannot
be added manually. In analog source material a silence of 2.7
seconds or more is automatically detected as a track
increment.
Make sure the disc is absolutely free of scratches and dust
particles.
Press EXT(ernal) SOURCE repeatedly until (depending on the
digital connection used):
➜ DIGITAL I d, OPTICAL I p or ANALOG a lights up
and 
DIGITAL 1, OPTICAL or ANALOG appears on
the display.
With the CD recorder stopped, press REC TYPE
five times: if you wish to record a complete disc or program.
➜ f RECORD g and 
SYNC
start to flash and the display
shows 
REC EXT DISC.
• If 
CHECK INPUT message also flashes, the digital
connection is incorrect.
Start autostart recording
To start recording, press PLAY on the selected source.
➜ The CD recorder automatically starts to record and 
RECORD g lights continuously. The recording time
left appears on the display. 
• If, however, you start the source during a track, CD-SYNC
recording starts at the beginning of the next track or after
2.7 seconds of silence in analog recordings.
• To check the elapsed recording time, press DISPLAY. (This
can also be done during recording)
• The recorder stops automatically.
To stop recording manually, press STOP on the CD recorder.
WAIT lights up and 
SYNC
and f RECORD g go out.
• If STOP 9 was pressed within 3 seconds after pressing
PLAY, no recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
➜ f RECORD g starts to flash. To resume, press
RECORD on the CD recorder.
After recording the display will show 
UPDATE for several
seconds.
Note: Recordings from DAT, DCC or analog sources will only
stop after 20 seconds silence. 
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs. 
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers always use 
REC EXT
DISC.
REM
TRACK
REC
TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC
MANUAL
RECORD
REM
TOTAL
ALL
TRACK
TIME
STEP
TRACK
CD
RW
REM
TRACK
REC
TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL
RECORD
REM
TOTAL
ALL
TRACK
TIME
STEP
TRACK
CD
RW
OPEN / CLOSE
PLAY / PAUSE
STOP
REC
TYPE
OPEN / CLOSE
PLAY / PAUSE
STOP
EXT
SOURCE
ERASE
FINALIZE
CDR
RECORD
PHONES
DISPLAY
SCROLL
DJ MODE
REPEAT
SHUFFLE
PROG
CDR 775 AUDIO CD RECORDER
ANALOG
RW
Autostart recording from external CD player
CD-SYNC
RECORDING