Philips ct1608-000apmea User Manual
Getting started
1
1 • Getting started
Read the safety instructions in the “Precautions” section
before use.
before use.
To use your phone, you must insert a valid SIM card
supplied by your operator or retailer. The SIM card
contains your subscription and a memory in which
you can store phone numbers and messages.
supplied by your operator or retailer. The SIM card
contains your subscription and a memory in which
you can store phone numbers and messages.
1.
Press on the back cover and slide it downwards
to remove it.
to remove it.
2.
Place the SIM card in its slot (with the
connectors facing the phone) then replace the
metallic holder.
connectors facing the phone) then replace the
metallic holder.
3.
Insert the battery (with the connectors facing the
connectors of the phone) and press until it clips.
connectors of the phone) and press until it clips.
4.
Replace the back cover by sliding it back in it
slot until it stops. Remove the protective film
covering the screen before using the phone.
slot until it stops. Remove the protective film
covering the screen before using the phone.
To switch on the phone, long press
)
. Enter the
PIN code if required (i.e. the 4- to 8-digit secret code
of your SIM card). It is preconfigured and
communicated to you by your operator or retailer. To
personalise the PIN code, see “Change codes”
page 14. Press
of your SIM card). It is preconfigured and
communicated to you by your operator or retailer. To
personalise the PIN code, see “Change codes”
page 14. Press
,
to confirm.
Insert the SIM card
Switch on the phone
Philips160_GB_4311 255 63101.book Page 1 Vendredi, 12. août 2005 9:36 09