Philips ct1638-000apmea User Manual
Settings
12
and selected. Use
<
to select the pictures of your
choice, then press
,
to activate the screen saver.
Backlight
Backlight is activated when receiving incoming calls
or messages, browsing menus, etc. Select one of the
available values.
or messages, browsing menus, etc. Select one of the
available values.
Deactivating this function increases battery life.
Wallpaper
Allows you to set the wallpaper display on the main
screen
screen
On
or
Off
in idle mode.
Only JPEG type pictures can be used as wallpapers.
Contrast
Allows you to choose from several levels of contrast.
Allows you to set up a direct access to a specific
function or a contact by linking it to a key.
function or a contact by linking it to a key.
Hotkeys are configured by default, e.g.
6
for
Silence, but you can reprogram them (keys from
2
to
9
only). The following hotkeys are locked:
1
(call voice mailbox) and
*
(dial international call).
Depending on your service provider, other hotkeys
may be predefined and locked.
may be predefined and locked.
Select a key from
2
to
9
and press
,
. If the
key was already programmed, press
,
and select
Change
. In the list, choose the function you wish to
associate with this key and press
,
. If you select
Flash dial
, you will asked to choose a contact in the
names list.
To use the hotkeys, press and hold the programmed
key while in idle mode.
To use the hotkeys, press and hold the programmed
key while in idle mode.
Clock display
Allows you to select
Analogue
,
Digital
,
Tiny digital
or
No
clock
time formats when shown in idle mode.
Set time
Allows you to set the time by pressing the appropriate
numeric keys. You can also use
numeric keys. You can also use
+
/
-
to increase
or decrease the time minute by minute.
Set date
Allows you to set the date by pressing the appropriate
numeric keys. You can also use
numeric keys. You can also use
+
/
-
to set the
date.
Hotkeys
Time and date