Philips ct2898-akusa0p2 User Manual
18
Extras
Alarm clock
Our mobile phone has a built-in alarm clock
with a snooze feature. You can set up to three
separate alarms and choose whether or not
with a snooze feature. You can set up to three
separate alarms and choose whether or not
the alarm should repeat. To set an alarm, follow the
steps below:
1.
steps below:
1.
Select an alarm and set it
On
.
2.
Then enter the time and press
,
.
3.
Then select the frequency:
Once
,
daily
,
On
weekdays
.
4.
Finally, select the type of alarm: the
Buzzer
or a
melody from the sounds album and press
,
.
Repeat above steps to set other alarms.
The alarm clock will ring even if your mobile phone is
switched off and/or the ringer volume is set to Silent.
When the alarm rings, press any key to stop it (except
if the snooze mode is on, see below).
switched off and/or the ringer volume is set to Silent.
When the alarm rings, press any key to stop it (except
if the snooze mode is on, see below).
Snooze mode
This menu allows you to set the snooze mode
On
or
Off
. When the alarm rings and the snooze mode is
On
:
• press any key (except
R
Stop
) to stop the ringing
temporarily. The alarm will ring again around 7
minutes later.
minutes later.
• press
R
Stop
to stop the ringing and the alarm
repetition.
The snooze mode is automatically deactivated after 9
alarm repetitions.
alarm repetitions.
The snooze mode setting applies to all the alarms you
have set.
have set.
Connectivity (Bluetooth and Infrared)
Your mobile phone allows you to connect to
a variety of external devices via infrared and
bluetooth. This menu provides you with
more features to set up the connection with
these external devices.
a variety of external devices via infrared and
bluetooth. This menu provides you with
more features to set up the connection with
these external devices.
Infrared
Your mobile phone has an infrared port that allows
you to send or receive data to or from other infrared-
compliant devices (e.g. another mobile phone, a
computer, a PDA, etc.) through a wireless link.
you to send or receive data to or from other infrared-
compliant devices (e.g. another mobile phone, a
computer, a PDA, etc.) through a wireless link.
Files that are copyright protected cannot be sent.
When connecting with a PC, make sure you have
activated its infrared option.
When connecting with a PC, make sure you have
activated its infrared option.
Position of devices
Before transmitting data between two devices, they
must be correctly positioned in relation to one
another. Make sure that:
Before transmitting data between two devices, they
must be correctly positioned in relation to one
another. Make sure that: