Philips ct2898-akusa0p2 User Manual

When  you  switch  on  your  mobile  phone  with  your
new SIM for the first time, you will be asked  to
customize your phone.  This function will help you to
set the following parameters:

Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low, if the battery
alert is 

. (see “Sounds alerts” on page 49)

Once the battery and battery cover are back in place
you can charge the phone. Plug in the connector as
shown below. Then plug the other end into a main
AC power socket.

The battery symbol indicates the state of charge. During
charging, the charge indicators will scroll; it takes around
2.5 hours to fully recharge your mobile phone. When all
the scroll bars are steady the battery is fully charged. You
can then disconnect the charger.
Depending on the network and condition of use, talk time
goes up to 8.5 hours and stand-by time up to 850 hours.
Keeping the charger plugged to the mobile when the
battery is fully charged will not damage the battery. 
The only way to turn off the charger is to unplug it,
so use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).

You can configure the numeric keys 2 to 9 (except 5,
which is locked, used for the Torch) to access your
favourite features simply by long-pressing on the numeric
key. A number of hotkey shortcuts are pre-configured.
For more information, see “Shortcuts” on page 52