Philips ct3308-00myasia User Manual
67
WAP services
Each of these settings allows you to:
- Visualise all parameters of the selected WAP profile (Gateway IP
Address, Homepage address, phone number, etc.),
-
Activate
the selected profile (which then becomes the default profile
and is used for connection),
-
Change
the parameters of the WAP profiles as described below.
L
Some pre-configured profiles might be locked, preventing re-programming.
GSM Settings
Allows you to enter or change the GSM settings and gives you access to the
following items:
following items:
-
-
-
Login
and
Password
allow you to enter the login and password
needed. In both
cases, enter the information and press
,
to confirm.
Phone Number
allows you to enter the phone number needed to establish a
connection with your WAP Service Provider (ISP). Select
Phone numbers
and
press
,
, then press up or down to select:
-
ISDN No.
to enter an ISDN ISP number, OR
-
Analogic No.
to enter an analogic number, then press
,
.
Enter the "+" sign followed by the number provided by your operator and press
,
.
L
Contact your operator to know what type of number you should select.
Inactivity time
allows you to enter an inactivity time period after which the
phone automatically ends the WAP session (if a connection was
in
progress)
and returns to idle screen. Select
Inactivity time
and press
,
, then enter a
value (in second) of over 30 s.
and press
,
.
Change name
Allows you to enter or change the name of the selected WAP profile. Press
,
, enter the name of your choice and press
,
to confirm.
Gateway
Allows you to enter or change the IP address and port number (subscription
dependent) for the gateway: select Gateway and press
dependent) for the gateway: select Gateway and press
,
, then enter the IP
Address and press
,
.
GSM Settings
Login
Password
Phone number
Inactivity time
Gateway
Change name