Philips ct6558-00rbeuro User Manual

Page of 85
74
Troubleshooting
Troubleshooting
The phone does 
not switch on
Remove and reinstall the
battery (see page 1). Make sure
you plugged the jack of the
charger into the correct
connector (see “Charge the
battery” page 2)
. Then charge
the phone until the battery
icon has stopped scrolling.
Finally, unplug from the
charger and try to switch the
mobile on.
The display 
shows 
BLOCKED 
when you switch 
on
Somebody tried to use your
phone but didn’t know the
PIN code nor the unblocking
code (PUK). Contact your
service provider.
The display 
shows IMSI 
failure
This problem is related to your
subscription. Contact your
operator.
The  
symbol 
is not displayed
The network connection is
lost. Either you are in a radio
shadow (in a tunnel or between
tall  buildings)  or  you  are
outside the network coverage
area. Try from another place,
try to reconnect to the network
(especially when abroad),
check that the antenna is in
place if your mobile has an
external antenna, or contact
your network operator for
assistance/information about
the network.
The display 
doesn’t respond 
(or the display 
responds slowly) 
to key presses
The display responds more
slowly at very low
temperatures. This is normal
and does not affect the
operation of the phone. Take
the phone to a warmer place
and try again. 
In other cases please contact
your phone supplier.