Philips dtr320 User Manual

CONNECTING YOUR DIGITAL RECEIVER 11

- Plug your aerial lead plug into the “AERIAL IN” socket of your digital receiver.
- Connect the “RF OUT” socket of your digital receiver to the “ANT IN” socket of your VCR by

means of the RF coaxial lead supplied with your digital receiver.

- Connect the “ANT OUT” socket of your VCR to the aerial input socket of your TV by means of a

RF coaxial lead.

- Connect the “TV” SCART socket of your digital receiver to the “EXT1” SCART socket of your TV

by means of the SCART lead supplied with your digital receiver.

- Connect the “VCR” SCART socket of your digital receiver to the “EXT1” SCART socket of your

VCR by means of a SCART lead. Alternatively, if your VCR supports the Easy Record feature,
connect the “VCR” SCART socket of your digital receiver to the “EXT2” SCART socket of your
VCR as shown on the second diagram.

- Plug all your equipment, excluding your digital receiver, into the mains.
- Switch on your TV and select a channel.
- Plug your digital receiver into the mains.Your digital receiver will display the SETUP screen (the

green LED will be illuminated).

- Proceed to chapter 3 to continue with the channel scan of your digital receiver.

Note:
1. With either connection set up you can:

- Watch digital TV while you record analogue TV.
- Watch analogue TV while you record digital TV.
- Record the digital TV channel you are watching.
- Watch Play Back from your VCR.

2. With the second connection set up, you can use the Record Link feature provided your VCR supports it.

to AC outlet

TV set

VCR/DVD

ANT IN

ANT OUT

EXT 1
EXT 2

EXT 1

EXT 2

For optimum configuration

RF Cable

Terrestrial Receiver

NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 11