Philips dtr320 User Manual
14 DAY TO DAY OPERATION
E
n
g
lis
h
4.1
Switching your receiver
ON/OFF (standby)
ON/OFF (standby)
To wake up your receiver from standby mode,
press <P+>, <P->, <BACK>, or any number
button of the remote control. Alternatively,
press the <Standby> button on the front panel
of the receiver.
To put your receiver in standby, press the
remote control standby button. Alternatively,
press the <Standby> button on the front panel
of the receiver.
press <P+>, <P->, <BACK>, or any number
button of the remote control. Alternatively,
press the <Standby> button on the front panel
of the receiver.
To put your receiver in standby, press the
remote control standby button. Alternatively,
press the <Standby> button on the front panel
of the receiver.
Note: pressing and holding the <Standby> button
on the front panel of the receiver for more
than 4 seconds will reset your receiver.
than 4 seconds will reset your receiver.
Your receiver, as any electronic
equipment, consumes power. In order
to reduce power consumption, please
switch your receiver to standby
whenever you are not using it. If you
are not using your receiver for a long
period of time we recommend you
switch it off by unplugging it from the
mains.This will maximize energy saving
and help protect the environment.
equipment, consumes power. In order
to reduce power consumption, please
switch your receiver to standby
whenever you are not using it. If you
are not using your receiver for a long
period of time we recommend you
switch it off by unplugging it from the
mains.This will maximize energy saving
and help protect the environment.
4.2
Selecting TV/Radio mode
To switch your receiver from TV to RADIO mode
and vice versa, press the <TV/RADIO> button.
and vice versa, press the <TV/RADIO> button.
4.3
Changing channels when
watching digital TV or
listening to digital radio
watching digital TV or
listening to digital radio
4.3.1
Using number buttons
- Press the number button(s) to select the
desired channel number.
4.3.2
Using <P+>/<P->
- Press <P+>/<P-> to select the next/previous
channel in the list.
4.3.3
Using <BACK>
(last channel recall)
(last channel recall)
- Press the <BACK> button to return to the
previously selected channel.
4.3.4
Using the channel list
- Press the <OK>
button to open the
channel list.
channel list.
- Press the
t
or
y
button to move to
the desired channel.
the desired channel.
- Press <OK> to exit
the list and view the
selected channel.
selected channel.
4.3.5
Using your favourite lists
- Press the <FAV>
button to open the list
of all available channel
lists.
of all available channel
lists.
- Press the
t
or
y
to
move to the desired
list.
list.
- Press the <OK>
button to make the list
active and tune your
receiver to the channel
that was tuned when
the list was last activated.
active and tune your
receiver to the channel
that was tuned when
the list was last activated.
Note: empty favourite lists are not displayed.
4
Day to day operation
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 14