Philips dtr320 User Manual
28 ADVANCED SETTINGS
E
n
g
lis
h
7.2.2
Digital receiver and VCR
settings
settings
Refer to paragraph 5.2.3.2 on how to enable
the “Easy Record” function of your digital
receiver.
- Depending on your VCR brand and type, you
the “Easy Record” function of your digital
receiver.
- Depending on your VCR brand and type, you
have to set the “VCR control” option to
“Prepare Record” or “Record Link”. Refer to
the user manual of your VCR alternatively
try the two options to find out which is
applicable.
“Prepare Record” or “Record Link”. Refer to
the user manual of your VCR alternatively
try the two options to find out which is
applicable.
- Set your VCR to the mode allowing control
by your digital receiver.
7.2.3
Recording using the VCR
control feature
control feature
- Your digital receiver,TV and VCR are
connected and set according to 7.2.1.
- You have programmed a timer on your
digital receiver.
- At timer start, your VCR starts recording
and at timer end your VCR stop recording
under the control of your digital receiver.
You no longer need to program your VCR to
record digital TV channels.
under the control of your digital receiver.
You no longer need to program your VCR to
record digital TV channels.
Note: some VCRs need to be in standby for the
recording to start. Please refer to your VCR
user manual.
user manual.
NOTICE DTR 320_290405.qxd 29/04/05 14:07 Page 28