Philips dtr1500 User Manual
CHANGE THE SETTINGS 21
8.2
Change the installation settings
Press MENU button to open the main menu.
Press 9 button 4 times to bring the selection onto
Press 9 button 4 times to bring the selection onto
Installation.
Note: If the Parental control is active, you need to enter your
Note: If the Parental control is active, you need to enter your
PIN code to access the relevant items of the selected menu
option.
Press the * button to access the Installation sub
options.
The selection is now on Receiver settings in the new
Installation menu.
8.2.1 Receiver settings
From the Installation menu, you selected Receiver
settings and pressed * button.
A new menu is displayed showing the following
settings and pressed * button.
A new menu is displayed showing the following
adjustments:
- TV/VCR signal output.
- TV video format.
- TV sound format.
- Default volume of TV sound.
- VCR sound format.
- VCR control for recording.
The selection is now on TV/VCR output.
You can scroll down or up with the 9 or 8 button to
choose the wanted option.
For each option, you can press on * button to access its
For each option, you can press on * button to access its
sub options.
8.2.1.1 TV/VCR output allows you to select the
8.2.1.1 TV/VCR output allows you to select the
signal format of the TV and VCR SCART
sockets from the list below:
- RGB/PAL-CVBS
- RGB/SVHS
- PAL-CVBS/PAL-CVBS
- PAL-CVBS/SVHS
- SVIDEO/PAL-CVBS
- SVIDEO/SVHS
Note: First word before / is dedicated to TV SCART. Second
Note: First word before / is dedicated to TV SCART. Second
word after / is dedicated to VCR SCART.
Note: We advise to use RGB/PAL-CVBS setting to get the
best quality of the video at the TV screen. If a Video Projector is
used instead of a TV set, the SVIDEO/PAL-CVBS setting is
advised (refer to chapter 5.4 for connection and installation).
Note: If you have a S-Video VCR Recorder you might use the
RGB/SVHS setting, consult the user manual of your VCR /
Recorder.
English