Philips dvd728-001 User Manual

21

3139 246 12381

The REVERB MODE can stimulate the echo and
frequency response of some particular places to
make you feel like personally on the place.

 Press the 

34 keys to highlight the REVERB

MODE.

 Enter its submenu by pressing the 

2  key.

 Move the cursor by pressing the 

34 keys to

highlight the selected item.
➜ OFF: Playback a disc in original sound effect.

 Press OK.

 Press the 

1 key to return to the DIGITAL

OUTPUT SETUP menu.

In this menu, you can set up the digital audio
output signal from the digital terminals, such as
coaxial or optical etc.

 Press SYSTEM MENU to enter the SETUP

menu.

 Press the 

34 keys to choose the DIGITAL

OUTPUT SETUP.

 Press OK.

 Press the 

34 keys to highlight DIGITAL

OUTPUT.

 Enter its submenu by pressing the 

2 key.

 Press the 

34 keys to highlight the selected item.

➜ ALL: Original digital signals output.
➜ PCM ONLY: If your receiver is PCM-
compatible, or your receiver can not decode
MPEG-2, Dolby Digital, or DTS audio, choose
this option.

 Press OK.

 Press the 

1 key and return to the DIGITAL

OUTPUT SETUP menu.

If you connect the DVD Player to a PCM
compatible receiver via the digital terminals, such
as coaxial or optical etc, you may need to adjust
LPCM OUTPUT.
Discs are recorded at a certain sampling rate.
The higher the sampling rate, the better the
sound quality.

 Press the 

34 keys to highlight the LPCM

OUTPUT.

 Enter its submenu by pressing the 

2  key.

 Move the cursor by pressing the 

34 keys to

highlight the selected item.
➜ 48K: Playback a disc recorded at the sampling
rate of 48kHz.
➜ 96K: Playback a disc recorded at the sampling
rate of 96kHz.

 Press OK.

 Press the 

1 key to return to the DIGITAL

OUTPUT SETUP menu.

01-29 DVD728 Eng

18/03/2003, 4:39 PM

21