Philips dvdr3400-37b User Manual

Page of 77
English
58
PLAYBACK settings
 
(underlined options are the factory default settings)
DVD Setup Menu Options 
(continued)
TV Aspect Ratio
  Set the aspect ratio of the recorder according to the TV type you 
have connected.
16:9 } 
–  Select this for wide  screen TV  
 (frame ratio 16:9.)
 { 4:3 Letterbox } – Select this for a ‘wide screen’ 
display with black bands on the upper 
and lower portions of the TV screen.
4:3 Panscan }  –  Select this for a full-height  
 picture with both side trimmed.
Video Output 
Format
  The colour system of the DVD system, DVD and TV should 
match. Only then will it be possible to play a DVD on this system. 
Before changing the TV system, determine the colour system of 
your TV.
NTSC } 
 –  Select this if the connected TV has the NTSC 
colour system. It will change the video signal 
of a PAL disc and output it to NTSC format.
PAL } 
–  Select this if the connected TV has the PAL    
colour system. It will change the video signal 
of  an NTSC disc and output it to PAL format.
Note: If a blank/distorted TV screen appears, wait for 15 seconds for the 
auto recovery.
HDMI Video 
Resolution
  This feature is only applicable if you have connected a HDMI 
device. Select the video resolution depending on the capability of 
the connected HDMI TV/device: { 480i }, { 480p }, { 576i }, 
576p }.
Digital Audio 
Output
  Adjust the digital output setting only if you have connected other 
devices to the coaxial jack on the recorder.
ALL } 
–  Select this if you have used the COAXIAL 
jack on the recorder to connect to a stereo  
receiver that has a built in multichannel 
decoder.
LPCM } 
–  Select this if the connected audio equipment 
is not capable of decoding multichannel audio 
Dolby Digital and MPEG-2 multi-channel 
signals are converted to PCM (Pulse Code 
Modulation.)