Philips dvdr890-001 User Manual
68
Problem solving for programmed
recordings
recordings
PROBLEM
SOLUTION
DVD recorder is not
responding
responding
b
While a programmed recording is being made, you cannot operate your recorder manually. If you
want to cancel the programmed recording, press STANDBY
want to cancel the programmed recording, press STANDBY
m .
'
Switch off, timer
recording' flashes on
the TV screen.
the TV screen.
b
The DVD recorder was switched on several minutes before the start of a programmed recording.
Switch off the DVD recorder with STANDBY
Switch off the DVD recorder with STANDBY
m . A programmed recording (timer) will only
function if the DVD recorder is switched off (button STANDBY
m ).
Error message: '
Insert
recordable disc'
b
Either no disc has been inserted or you cannot record to this disc. Insert a disc that you can
record onto. Switch off the DVD recorder using STANDBY
record onto. Switch off the DVD recorder using STANDBY
m .
The error message
'
'
Disc locked' appears
briefly on the screen.
b
A write-protected disc has been inserted. Cancel the protection (see 'Preventing accidental
erasing of discs' in 'Manual Recording') or insert a different disc.
erasing of discs' in 'Manual Recording') or insert a different disc.
Error message:
'
'
Memory full'
b
If this error message appears after pressing TIMER , then all the TIMER blocks are already
programmed. No more recordings can be programmed. Press the
programmed. No more recordings can be programmed. Press the
C button. If you want to clear
or check a programmed recording (TIMER block), select it with
B or A .
The '
Data error'
message appears on
the screen.
the screen.
b
The data for the recording could not be transferred. Please check the date, start time and end
time of the programmed recording.
time of the programmed recording.
'
Collision' appears on
the screen.
b
The information for two programmed recordings overlap.
b
If you ignore this error message the TV programme with the earlier start time will be recorded
first. You will miss the start of the second programme.
first. You will miss the start of the second programme.
b
Change the information for one of the recordings.
b
Delete one of the recordings
Programming a recording (TIMER)