Philips dvp3010-04 User Manual

 

•  Open the tray 
•  Press key 5, 5 

Upgrade file name will be displayed on the TV Screen. 

 

1.  Click the link to save the software on your computer. 

2.  Unzip the .zip file and extract files into your PC. 

 

 

1.  Burn the files to blank CD-R or CD-RW, not a DVD, using the following 

settings:  

• 

File System CD-ROM ISO Level 2  

• 

Mode 1/2/XA  

• 

Character set ISO 9660  

• 

Finalized, single session  

• 

Write speed slow (e.g. 2x, 4x) 

Finalize the disc. (The application may do this automatically.)  

NOTE: Packet writing application for drag & drop copying cannot be used 
for creating an upgrade disc. Use only a dedicated CD writing application 
allowing ‘disc at once’ recording.  

No UDF setting as well.  

2.  Power on the set 

3.  Put in the disc 

4.  A message will be displayed on the OSD after the upgrade file is recognized 

5.  Follow the instruction displayed on the TV Screen – Press “OK” to upgrade 

6.  After reading the file, the disc will be ejected 

7.  Remove the disc, but DO NOT close the tray 

8.  Wait approximately 3-5 minutes for the software to be upgraded 

9.  The set will restart itself once the upgrade is completed. 

 

 

 

4 of 5