Philips dvp3040-05 User Manual

31

1

In disc mode, press SETUP.

2

Press 

1 2 to select ‘Audio Setup’ icon.

3

Press OK to confirm.

This options allows you to set the stereo
analog output of your DVD Player.

1

In ‘AUDIO SETUP PAGE’, press 

3 4 to

highlight {ANALOG OUTPUT}, then
press 

2.

Stereo
Select this option when output delivers
sound from only the two front speakers.

LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.

V SURR
Allows the DVD player to use virtual
surround sound effects.

2

Press 

3 4 to select a setting, then press

OK to confirm your selection.

The options included in Digital Audio
Setup are: ‘Digital Output’ and ‘LPCM
Output’.

1

In ‘AUDIO SETUP PAGE’, press 

3 4 to

highlight {DIGITAL AUDIO SETUP}, then
press 

2.

2

Press the 

3 4 keys to highlight an option.

3

Enter its submenu by pressing 

2.

4

Press 

3 4 to select a setting, then press

OK to confirm your selection.

Digital Output
Set the Digital output according to your
optional audio equipment connection.

➜

Off: Turn off the digital output.

➜

All: If you have connected your

DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.

➜

PCM Only: Only if your receiver is

not capable of decoding multi-channel
audio.

If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.

➜

48K: Playback a disc recorded at the

sampling rate of 48kHz.

➜

96K: Playback a disc recorded at the

sampling rate of 96kHz that can only be
achieved in Stereo-Classic (Flat) mode.

The underlined option is the factory default setting.
Press 

1 to go back to the previous menu item. Press SETUP to exit the menu item.

001-043 DVP3040_Eng_02_RC4

05/06/06, 2:14 PM

31