Philips dvp3040-05 User Manual

41

– The DVD+R/CD-R must be finalised.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– Region code incorrect.

– Check the disc for fingerprints/scratches and

clean with a soft cloth wiping from centre to edge.

– Reset the unit by switching the player off, then on

again.

– Aim the Remote Control directly at the sensor

on the front of the player.

– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–

signs) as indicated.

– To completely reset the player, unplug the AC

cord from the AC outlet for 5-10 seconds.

– Operations may not be permitted by the disc.

Refer to the instructions of  the disc jacket.

– Use a commonly available cleaning CD/DVD to

clean the lens before sending the DVD Player for
repair.

– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items

cannot be selected.

– Check that the DivX file is encoded in ‘Home

Theater’ mode with DivX 5.x encoder.

Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to

‘YUV’.

– The audio codec may not be supported by the DVD

player.

– Check that file size of the movies does not exceed

the file size of the CD disc during burning.

Visit us at www.philips.com/support for service support

001-043 DVP3040_Eng_02_RC4

05/06/06, 2:14 PM

41