Philips dvp3180k-93 User Manual
English
28
DVD Menu Options
(continued)
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
Downmix
This option allows you to set the stereo
analog output of your DVD Player.
analog output of your DVD Player.
A
In ‘Audio Setup’, press
to highlight
{ DOWNMIX }, then press .
{ LT/RT }
Select this option if your DVD Player is
connected to a Dolby decoder.
Select this option if your DVD Player is
connected to a Dolby decoder.
{ STEREO }
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
{ VSURR }
Allows the DVD player to use virtual
surround sound effects.
Allows the DVD player to use virtual
surround sound effects.
B
Press
to select a setting, then press
OK to confi rm your selection.
Down Sample
You can enable and disable the digital
signal for better sound output quality.
signal for better sound output quality.
A
In ‘Audio Setup’, press
to highlight
{ DOWN SAMPLE }, then press .
{ 48K }
Playback a disc recorded at the sampling
rate of 48kHz.
rate of 48kHz.
{ 96K }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
B
Press
to select a setting, then press
OK to confi rm your selection.
01-33 DVP3180K_93_eng1.indd 28
01-33 DVP3180K_93_eng1.indd 28
2006-12-01 10:02:03 AM
2006-12-01 10:02:03 AM