Philips dvp3320-55 User Manual

1)  Burn the data onto a blank CD-R or RW disc. 

1)    Power on the set and insert the prepared Upgrade   

CDR.

2)    The set will starts reading disc & response with 

the following display TV screen: 

Loading 

Firmware Upgrade Erase and program. 

Select  OK  to start upgrade. 

3)    Press <OK> button to confirm, then screen will 
display :   
    Firmware Upgrade Programming, Please Wait... 
    Do not Switch the Player Off ! 
4)    The upgraded disc will automatically out when 

files coping complete, then take out the disc. 

5)    About 1 minute later, the tray will automatically 

close when upgrading complete.   

1)  Power on the set and Open the tray door. 
2)  Press <9><6><6>button to check the software 

information.
The software version and other information are 
display on the TV screen as follows: 
BE Version: DVP33XX_XX.XX 
FE Version: XXXX.XXXXXX 
DSP Version: DSP.XX 
Region Code: X 

4-1

Caution: The set must not be power off during 
upgrading, Otherwise the Main board will be 
damaged entirely.   

OK                       Cancel

Region Code Change

1)   Power on the set and open the tray door;

2)   Press "9" "8" "7" "9" and press the region

   code number (0-6) on the remote control.

   Notes:restart after above steps.