Philips dvp900sa-00_a User Manual
/00_3139 246 13872
English
21
Getting Started
Step 4: Setting the speakers’
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimize the sound according to
your surroundings and setup.
and surround only) and volume level for
individual speakers. These adjustments let
you optimize the sound according to
your surroundings and setup.
IMPORTANT!
The speaker settings only available on
Multi-channel audio outputs. You can
also press SOUND MODE button to
select Multi-channel.
Multi-channel audio outputs. You can
also press SOUND MODE button to
select Multi-channel.
1
Press SYSTEM MENU.
2
Press 4 to select {SETUP}.
3
Press
1 2 to highlight {SPEAKERS}, then
press
4.
Use
← or → to select other options, ↓ to enter the submenu,
RETURN to leave the menu.
Speakers Movie Mode
Music Mode
Front Size
Surround Size
Centre Size
Setup
Subwoofer
4
Press 34
to highlight one of the options,
then press
2.
{FRONT SIZE, CENTER SIZE,
SURROUND SIZE}
OFF – when no speaker is connected.
LARGE – when connected speakers can
produce low frequency signals below
120Hz.
SMALL – when connected speakers
cannot produce low frequency signals
below 120Hz.
SURROUND SIZE}
OFF – when no speaker is connected.
LARGE – when connected speakers can
produce low frequency signals below
120Hz.
SMALL – when connected speakers
cannot produce low frequency signals
below 120Hz.
{SUBWOOFER}
ON – when a subwoofer is connected.
OFF – when no subwoofer is connected.
ON – when a subwoofer is connected.
OFF – when no subwoofer is connected.
{FRONT DISTANCE}
– Sets the distance from your listening
place to the front speakers
– Sets the distance from your listening
place to the front speakers
(1 ~ 11.8m).
{CENTER/REAR DISTANCE}
– Sets the distance from your listening
place to the center/rear speakers.
– Sets the distance from your listening
place to the center/rear speakers.
(choices
different depending on the {FRONT
DISTANCE} setting).
DISTANCE} setting).
5
Press 1 2 3 4 to adjust the setting that
best suit your surround sound needs.
best suit your surround sound needs.
6
Press OK to confirm.
Helpful Hints:
–
–
Use the longer delay time settings when
the surround/rear speakers are closer to the
listener than the front speakers.
–
listener than the front speakers.
–
The test tone will be automatically
generated to help you judge the sound level
of each speaker.
of each speaker.
Advance Bass Management
Movie Mode
This menu allows you to adjust each
speaker volume for playing all discs
except SACD audio playback.
speaker volume for playing all discs
except SACD audio playback.
➜
The volume balance value ranges from
-6dB to +7dB.
Music Mode
When music mode is set, speaker settings
will be applied during SACD playback
only.
Additional adjustments available in SACD
bass managements are:
–
will be applied during SACD playback
only.
Additional adjustments available in SACD
bass managements are:
–
Cut-off frequency adjustment:
60Hz, 80Hz, 100Hz and 120Hz
–
–
Slope adjustment:
12dB/oct, 18dB/oct and 24dB/oct
Helpful Hint:
–
–
These additional adjustments are
available in the subwoofer adjustments.
TIPS:
To return to the previous menu, press
1.
To remove the menu, press
SYSTEM MENU
.
01-41 DVP900_00A1
15/09/2004, 10:01 AM
21