Philips FWM139 User Manual
English
17
Clock/Timer
Setting the timer
● The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
time. The clock time needs to be set first before
the timer can be used.
● If no button is pressed within 7 seconds during
timer setup, the system will exit timer setting
mode automatically.
mode automatically.
1
In active mode, press and hold CLOCK/
TIMER for more than 2 seconds.
TIMER for more than 2 seconds.
2
Press TITILE-/+
¡1 / 2™ (í/ë on the
remote) to set the hours.
3
Press CLOCK/TIMER again.
➜ The clock digits for the minutes flash.
➜ The clock digits for the minutes flash.
4
Press TITILE-/+
¡1 / 2™ (í/ë on the
remote)to set the minutes.
5
Press CLOCK/TIMER to confirm the time
➜ The timer is now set and actiated.
➜ The timer is now set and actiated.
Activating and deactivating
TIMER
TIMER
● In standby or during playback, press
TIMER ON/OFF once.
➜ Display shows if activated, and disappears if
deactivated.
➜ Display shows if activated, and disappears if
deactivated.
Setting the clock
1
In any mode, press CLOCK/TIMER twice.
➜ The clock digits for the hours flash.
➜ The clock digits for the hours flash.
2
Press TITILE-/+
¡1 / 2™ (í/ë on the
remote) to set the hours.
3
Press CLOCK/TIMER again.
➜ The clock digits for the minutes flash.
➜ The clock digits for the minutes flash.
4
Press TITILE-/+
¡1 / 2™ (í/ë on the
remote)to set the minutes.
5
Press CLOCK/TIMER to confirm the time.
Note:
– If the clock has not been set, 0:00 will be
displayed.
– If the clock has not been set, 0:00 will be
displayed.
FWM139
pg001-pg020_FWM139_55_Eng
2006.5.23, 16:06
17