Philips FWM139 User Manual
8
English
Preparations
Rear connections
The type plate is located at the back of the
system.
system.
A
Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
– If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
– If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
B
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "
R" and left speaker to
"
L", coloured (marked) wire to "
+" and black
(unmarked) wire to "
-".
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of
+/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Speaker
(right)
Speaker
(left)
pg001-pg020_FWM139_55_Eng
2006.5.23, 16:06
8